Experimental investigation on erosion performance and wear factors of custom 450 steel as the first row blade material of an axial compressor
by Esmaeil Poursaeidi; Alireza Mohammadi Niaei; Masoud Arablu; Akbar Salarvand
International Journal of Surface Science and Engineering (IJSURFSE), Vol. 11, No. 2, 2017

Abstract: A first-stage blade of an axial compressor was fractured after 30,895 hours of operation due to existence of pits and micro-cracks, which were created by erosion and poor corrosion mechanisms. In this research, erosion of the blade material is tested under simulated conditions of the real blade. Abrasive particles impingement angles of 90° and 54° are tested to predict the erosion characteristics on the blade. The predicted blade erosion is validated using the data taken from on-site blades. The eroded specimens are examined by scanning electron microscopy, and wavelength- and energy-dispersive X-ray spectroscopy. According to the observations, although the 90° impingements make more pits than 54° impingements, the latter creates longer and more critical pits than the former. Furthermore, the results show that the erosion in the on-site blades is strong enough to assist the formation of severe pits on them which eliminates the crack initiation time.

Online publication date: Tue, 20-Jun-2017

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Surface Science and Engineering (IJSURFSE):
Login with your Inderscience username and password:

    Username:        Password:         

Forgotten your password?


Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com