Heat transfer and quench performance of aqueous CuO nanofluids during immersion quenching
by U. Vignesh Nayak; K. Narayan Prabhu
International Journal of Microstructure and Materials Properties (IJMMP), Vol. 11, No. 3/4, 2016

Abstract: The present work involves the assessment of quench performance of aqueous-copper oxide nanofluids. Distilled water-based copper oxide nanofluids of concentrations 0.01, 0.05, 0.1 and 1.0 vol.% were prepared by a two-step process. Cooling curves analysis was carried out using an Inconel probe that was instrumented with thermocouples. The recorded temperature data during experiments was used to estimate spatiotemporal heat flux transients by solving inverse heat conduction problem. Quenching of probe in nanofluids resulted in longer vapour phase stage duration compared to distilled water. The addition of nanoparticles altered the peak flux and the time of its occurrence. Rewetting temperatures were found to be lower for nanofluids. The measured thermal conductivities and viscosities showed similar values for all quench media.

Online publication date: Wed, 14-Sep-2016

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Microstructure and Materials Properties (IJMMP):
Login with your Inderscience username and password:

    Username:        Password:         

Forgotten your password?


Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com