Effect of workpiece heat treatment on surface quality of AWJ kerf
by Michele Monno; Giuseppe Pellegrini; Chiara Ravasio
International Journal of Materials and Product Technology (IJMPT), Vol. 51, No. 4, 2015

Abstract: Abrasive water jet (AWJ) can be effectively employed on a broad selection of work materials, ranging from polymers to lapideous materials and high grade steels. The AWJ cutting process involves several variables, including hydraulic, abrasive, mixing and cutting parameters. Moreover workpiece properties, mainly modulus and hardness, affect material removal type (cutting and deformation wear mode). This paper concentrates on the influence of the mechanical properties of the workpiece on kerf roughness that is achieving more and more attentions from manufacturers, aiming towards near net shape production. In particular, the same carbon steel (C40 UNI EN 10083-2) was used for all tests; two heat treatments were performed on different specimen sets. AWJ cuts on 'as is' (normalised) and hardened specimens (water-quenched) were realised using different traverse speed. The surface roughnesses of the kerfs at different depths were measured to evaluate process performance. A statistical analysis was carried out to assess the significance of the results. It was found that workpiece hardness affects surface finish in different ways, depending on water pressure, traverse rate and depth of measurement across the kerf. Such results support the theory about two different material removal mechanisms, activated at different levels of jet erosive power.

Online publication date: Mon, 19-Oct-2015

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Materials and Product Technology (IJMPT):
Login with your Inderscience username and password:

Username:        Password:          Forgotten your password?

Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com