Multi-objective optimisation in the microturning of cobalt chromium with coated and uncoated tools using the grey relational analysis Online publication date: Thu, 18-Jun-2015
by A. Gopikrishnan; M. Kanthababu; Nithin Tom Mathew; S. Gowri; R. Balasubramaniam
International Journal of Precision Technology (IJPTECH), Vol. 5, No. 1, 2015
Abstract: In this work, the microturning of cobalt chromium has been carried out using coated and uncoated tungsten carbide inserts. The experiments were conducted as per the design of experiments (DoEs) approach using the L9 orthogonal array by varying the spindle speed (S), feed (F) and depth of cut (Dcut) at three levels. The output parameters considered are the material removal rate (MRR), surface roughness (Ra) and tool wear (TW). The significant parameters and their levels were identified using analysis of variance (ANOVA) and response graphs. It is observed that the significant microturning process parameters are found to be different for different tool/workpiece combinations, for achieving a higher MRR, lower Ra and low TW individually. Therefore, a multi-objective optimisation using the grey relational analysis was performed considering MRR, Ra and TW together and the optimum level of input parameters were identified to achieve high MRR, low Ra and low TW together.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Precision Technology (IJPTECH):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com
Our Blog 
Follow us on Twitter 
Visit us on Facebook