Design of horizontal trenches for leachate recirculation in bioreactor landfills using two-phase modelling Online publication date: Tue, 16-Jun-2015
by Krishna R. Reddy; Rajiv K. Giri; Hanumanth S. Kulkarni
International Journal of Environment and Waste Management (IJEWM), Vol. 15, No. 4, 2015
Abstract: Horizontal trenches (HTs) are the simplest form of leachate recirculation systems (LRSs), constructed by excavating a trench to a desired depth and length along the length of a municipal solid waste (MSW) landfill. The performance of HTs is mainly based on few empirical studies. Moreover, previous mathematical models often either considered the MSW as saturated than unsaturated or assumed incorrect MSW properties. Hence, those studies lack the accuracy needed for the efficient design of HT. In this study, parametric studies are performed to develop design charts for HTs considering real field MSW conditions. Heterogeneous-anisotropic MSW resulted in an increase in wetted width and area and a decrease in the pore pressures developed than homogeneous-isotropic waste. Normalised design charts are provided to estimate wetted width, wetted area and pore water pressure at steady-state for a given leachate injection rate, hydraulic conductivity and the dimension and location of HT from a LRS.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Environment and Waste Management (IJEWM):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com
Our Blog 
Follow us on Twitter 
Visit us on Facebook