Electron beam irradiation of EPDM/PVC blend
by Chantara Thevy Ratnam; Sivanesan Appadu; Wan Ali Wan Yusof
International Journal of Materials Engineering Innovation (IJMATEI), Vol. 6, No. 1, 2015

Abstract: Blends of ethylene-propylene-diene-terpolymer, EPDM/polyvinyl chloride, PVC render poor mechanical properties as they are thermodynamically immiscible. In this work, the effect of irradiation on the EPDM/PVC blend was studied in order to enhance the mechanical properties through irradiation-induced co crosslinking of PVC and EPDM. The 50/50 EPDM/PVC blend was prepared by mixing in a Brabender Plasticoder at 170°C. The blend was then irradiated by using a 3.0 MeV electron beam machine at doses ranging from 0 to 200 kGy in air and room temperature. The gel fractions, hardness, tensile strength, Young's modulus, and elongation at break of the blends were measured. Enhancement in properties of the blend such as gel fraction, hardness, tensile strength and Young's modulus of the blend have confirmed the positive effect of the irradiation on the EPDM/PVC blend achieving an optimum tensile strength at 50 kGy irradiation dose. The addition of crosslinking agent, trimethylolpropane triacrylate (TMPTA) provides excellent acceleration in irradiation-induced crosslinking in the blend. However, the blend can achieve an optimum tensile strength with good retention in Eb in the absence of TMPTA. This observation is attributed to the co-vulcanised state which is achieved in EPDM/PVC blend at slower curing rate of the blends.

Online publication date: Fri, 12-Jun-2015

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Materials Engineering Innovation (IJMATEI):
Login with your Inderscience username and password:

Username:        Password:          Forgotten your password?

Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com