Application of Taguchi method for optimisation of powder mixed electrical discharge machining
by H.K. Kansal, Sehijpal Singh, P. Kumar
International Journal of Manufacturing Technology and Management (IJMTM), Vol. 7, No. 2/3/4, 2005

Abstract: The aim of this research paper is to establish optimum process conditions for Powder Mixed EDM (PMEDM) in the rough machining phase using the Taguchi Method. In this work, the effect of graphite powder addition into kerosene oil (dielectric fluid of EDM) has been analysed. The process performance is measured in terms of material removal rate (MRR), tool wear rate (TWR) and surface roughness (SR). Experiments are performed on a newly designed experimental setup. The test results are analysed to study the effect of selected process parameters, on MRR, TWR and SR. The experimental results show that the addition of an appropriate amount of the graphite powder into the dielectric fluid, caused discernible improvement in MRR and reduction in TWR as well as in SR.

Online publication date: Sun, 17-Apr-2005

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Manufacturing Technology and Management (IJMTM):
Login with your Inderscience username and password:

Username:        Password:          Forgotten your password?

Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com