Ultrasonic machining effects on the surface finish and strength of silicon carbide ceramics Online publication date: Sun, 17-Apr-2005
by M. Ramulu
International Journal of Manufacturing Technology and Management (IJMTM), Vol. 7, No. 2/3/4, 2005
Abstract: Ultrasonic machining experimental investigation was conducted on Silicon Carbide (SiC) and 20% volume titanium diboride-silicon carbide (TiB2/SiC) composite. Rectangular 304 stainless steel tools were used with three different abrasive grit sizes of silicon carbide (SIC) and boron carbide (B4C) abrasives were used while all other machining parameters were kept constant. The effects of the different abrasive sizes and types on the workpiece materials in terms of material removal rate, surface integrity, and flexural strength are presented. The #220 grit size for both abrasive types yielded the best overall results. Although both materials responded well to the ultrasonic machining process, the TiB2/SiC composite exhibited the better surface roughness and characteristic bending strength.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Manufacturing Technology and Management (IJMTM):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com