Modelling of pressure drop in eccentric narrow horizontal annuli with the presence of cuttings and rotating drillpipe
by Titus N. Ofei; Sonny Irawan; William Pao
International Journal of Oil, Gas and Coal Technology (IJOGCT), Vol. 9, No. 1, 2015

Abstract: Accurate pressure drop estimation is vital in wellbore hydraulic design. The present study investigates the effects of diameter ratio, fluid velocity, fluid type, fluid rheology and drillpipe rotation speed on pressure drop in eccentric horizontal wellbore with the presence of cuttings using computational fluid dynamics (CFD). The drillpipe is positioned at eccentricity of 0.623 and rotates about its own axis at 80 rpm and 120 rpm. The diameter ratio varies from 0.64-0.90. Results show significant increase in pressure drop with increasing fluid velocity and diameter ratio. Increase in drillpipe rotation speed from 80 rpm to 120 rpm shows insignificant effect on pressure drop for both Newtonian and non-Newtonian fluids. Non-Newtonian fluid exhibited large pressure drop compared to Newtonian fluid especially at low fluid velocities. Fluid rheology effects are also discussed. Experimental data confirmed the validity of the current model setup with a mean percentage error of 0.84%. [Received: April 03, 2013; Accepted: June 04, 2013].

Online publication date: Wed, 18-Mar-2015

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Oil, Gas and Coal Technology (IJOGCT):
Login with your Inderscience username and password:

Username:        Password:          Forgotten your password?

Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com