Design development and functional validation of an interchangeable head based on mini screw extrusion applied in an experimental desktop 3-D printer
by Zilda de Castro Silveira; Matheus Stoshy de Freitas; Paulo Inforçatti Neto; Pedro Yoshito Noritomi; Jorge Vicente Lopes da Silva
International Journal of Rapid Manufacturing (IJRAPIDM), Vol. 4, No. 1, 2014

Abstract: In this work is proposed the conceptual and preliminary design as well functional validation of a head based on fused deposition modelling (FDM) technology using mini screw applied to experimental 3-D printer (Fab@CTI machine). The polymer Nylon® 12 and the biopolymer ε-PCL (ε-policaprolactone) in powder form were used to design the barrel-screw and drive system set-up. The proposed head demonstrated the functionality to carry the powder material through the variable sections of the screw extrusion and has generated Nylon® filaments with diameter of approximately 0.7 mm with the tip of 0.4 mm. The morphological characteristics of these filaments were observed in scanning electron microscopy (SEM) confirming the mixing of the powder, generating continuous filaments and structured parts. SEM tests were made with ε-PCL using material generated from the feed to compression zones of the screw extrusion head allowing the visualisation of the adhesion of the grains in feed section and the complete mixing in the compression zone for the ε-PCL.

Online publication date: Thu, 23-Oct-2014

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Rapid Manufacturing (IJRAPIDM):
Login with your Inderscience username and password:

Username:        Password:          Forgotten your password?

Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com