Variable stroke piston mechanism for spark ignition engines Online publication date: Wed, 28-May-2014
by A.H. Elkholy
International Journal of Vehicle Design (IJVD), Vol. 16, No. 6, 1995
Abstract: The concept of load control in internal combustion engines by eliminating the inlet throttle and replacing it by controlling the piston stroke has gained great publicity recently. Nevertheless, certain design parameters should be considered in order to make this concept worthwhile. In this study, an optimized mechanism for varying engine stroke has been introduced. A criterion based upon the use of complex numbers technique was used to analyse the mechanism kinematically and dynamically and the results were then verified using graphical solution. The mechanism was found to produce up to 56% stroke variation within the control actuator capabilities. The compression ratio was found unchanged (within + 6%) which helps maintain steady combustion process. The entire mechanism is well tuned and no spark plug timing adjustment is required during stroke variation. The piston side thrust due to connecting rod angularities was found to be fairly low and should not impose any wear problems in the engine cylinder walls.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Vehicle Design (IJVD):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com