The effectiveness of palm oil methyl ester as lubricant additive in milling and four-ball tests
by Willey Yun Hsien Liew; Sebastian Dayou; Jedol Dayou; Nancy J. Siambun; Mohd. Azlan Bin Ismail
International Journal of Surface Science and Engineering (IJSURFSE), Vol. 8, No. 2/3, 2014

Abstract: This paper examines the effectiveness of palm oil methyl ester (POME) as lubricant additive using the four-ball and milling tests. In milling 55 HRC-stavax® (modified AISI 420 stainless steel) under flood lubrication, three stages of tool wear occurred: 1) initial wear by delamination, attrition and abrasion; 2) cracking at the substrate, 3) followed by formation of individual surface fracture at the cracks which would then enlarge and coalesce to form a large fracture surface. Mineral oil sprayed in mist form was more effective in reducing the coating delamination and delaying the occurrence of cracking and fracture. The effectiveness of mineral oil in suppressing these wear modes could be enhanced by the presence of POME. The mechanism by which the POME suppressed these wear modes could be explained by the results obtained in the four-ball tests which showed that the presence of POME as additive in the mineral oil reduced the friction coefficient, severity of welding and increased the critical load for welding to occur.

Online publication date: Sat, 17-May-2014

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Surface Science and Engineering (IJSURFSE):
Login with your Inderscience username and password:

Username:        Password:          Forgotten your password?

Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com