Microstructural investigation of through-silicon via fabrication by pulse-reverse electroplating for high density nanoelectronics Online publication date: Sat, 15-Nov-2014
by Nay Lin; Jianmin Miao; Robert Preisser
International Journal of Nanotechnology (IJNT), Vol. 11, No. 1/2/3/4, 2014
Abstract: In this paper, fabrication of through-silicon vias (TSV) with different diameters ranging from 60 μm to 150 μm is reported. It was observed that at the low current density of 20 mA/cm², all the through-holes with different diameters are filled with copper without voids and pores. At higher current density of 40 mA/cm², however, the pillars with diameters bigger than 100 μm tend to have voids at the middle portion of pillars. Focused ion beam (FIB) examination of the copper pillars fabricated with low current density reveals the difference in grain size and internal structure of the grain along the length of the pillar. Current-potential characters of solution were studied for the electrolyte bath used in the process. It shows the limiting current density around 40-60 mA/cm². The microstructures of TSV fabricated at low and high current densities are investigated and it shows that high current density produces porous copper with void at the core of TSV.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Nanotechnology (IJNT):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com
Our Blog 
Follow us on Twitter 
Visit us on Facebook