Tribological failure analysis of ball valve seals Online publication date: Mon, 07-Oct-2013
by Ridha Mnif; Mourad Chokri Ben Jemaa; Riadh Elleuch
International Journal of Microstructure and Materials Properties (IJMMP), Vol. 8, No. 4/5, 2013
Abstract: The ball valve seals are exposed during their use to thermal gradients (alternating the flow of cold and hot water), static loading (clamping force) and cyclic loading (alternating opening and closing) which can be sources of valve failures. The ball valves usually fail as a result of different failure modes such as wear, plastic deformation and corrosion. In order to describe these modes a failed ball valve which was belonged to a sanitary installation is investigated. The investigation of the failure was carried out by using several experimental tests including optical microscopy and Scanning Electron Microscopy (SEM). Tests were performed on a specific reciprocating tribometer for ball valve seals application. Experimental results revealed that the friction behaviour of polymeric seal depends strongly on the clamping load of seal and the manipulation frequency of counterface ball. Optical microscope observation of the worn surface showed that strong adhesion of the polymeric transfer layer to the counterface ball.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Microstructure and Materials Properties (IJMMP):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com
Our Blog 
Follow us on Twitter 
Visit us on Facebook