An improved stiffness model for piezo-actuated complementary clamp flexures Online publication date: Thu, 27-Nov-2014
by Tarek Mohammad; Shaun Salisbury
International Journal of Mechatronics and Automation (IJMA), Vol. 2, No. 4, 2012
Abstract: Mechanically complementary clamp configuration is a recent concept in piezoworm motor technology where both clamping sections can be driven simultaneously by same signal which reduces the actuation steps and drive electronics. Despite their opposite functionality, both normally clamp (NC) and normally unclamp (NU) clamps are designed based on same stiffness estimation so far. An improved stiffness model is proposed for normally clamp (NC) clamp section by considering the effects of the preloading, actuator displacement and flexure link length-thickness ratio in order to increase the buckling strength of the spring. It provides a more reliable prediction of the clamp behaviour both during its initial assembly, as well as under subsequently applied tensile loads in service. Finite element analysis is used to validate the proposed stiffness model. Experimental assessments are performed on the prototype to evaluate effect of the clamp stiffness on its displacement.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Mechatronics and Automation (IJMA):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com
Our Blog 
Follow us on Twitter 
Visit us on Facebook