Adsorption of ammonium using waste activated sludge from palm oil mill effluent treatment plant
by Nor Azyati Abdul Muttalib; Azlina Bt Harun @ Kamaruddin; Vel Murugan Vadivelu
International Journal of Global Environmental Issues (IJGENVI), Vol. 12, No. 2/3/4, 2012

Abstract: Low cost adsorbent was prepared using waste activated sludge (WAS) from a palm oil mill effluent (POME) treatment plant, and used to adsorb ammonium from aqueous solution. The effect of initial concentration, temperature, pH and adsorbent dose was studied in batch test to determine the kinetic and thermodynamic properties. The results showed that the uptake of ammonia increased with an increase in pH, initial concentration of ammonium and adsorbent dose but decrease with temperature. The adsorption of ammonium ion fitted both Langmuir and Freundlich isotherm. The highest monolayer saturation capacity of WAS was 37.07 mg/g at temperature 303oK. The −delta H show the process is exothermic while the amount of free energy (−delta G) indicate the adsorption were spontaneous and thermodynamically favourable. For kinetic model, pseudo second-order more suitable and significant in rate-controlling step in adsorption kinetic.

Online publication date: Thu, 28-Aug-2014

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Global Environmental Issues (IJGENVI):
Login with your Inderscience username and password:

    Username:        Password:         

Forgotten your password?


Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com