Study of strength and toughness in Japanese sword produced from Tamahagane steel by Tatara process
by M. Yaso; T. Takaiwa; Y. Minagi; T. Kanaizumi; K. Kubota; Y. Noda; Ananda Kumar Das; S. Morito; T. Ohba
International Journal of Materials and Product Technology (IJMPT), Vol. 42, No. 1/2, 2011

Abstract: Several metallurgical properties of a traditional Japanese sword were investigated from sharp edge to core area in cross-section and on surface. The microstructure is found to be lath martensite at the sharp edge and the prior austenite grain size is observed to be very fine. Towards the inside from the sharp edge in the cross-section, the microstructure changes gradually from hard martensite to soft ferrite. Micro hardness along the centre line in the cross-section was measured. The sharp edge is very hard and the hardness decreases drastically with the detachment from the sharp edge. The hardness gradient on the hardness distribution curve, tan θ is defined here. The value of tan θ is estimated as an important factor for the explanation of mechanical properties of Japanese swords. Furthermore, residual stress was measured with XRD. Large compressive stress is consequently found on the surface including the sharp edge, which is effective for strengthening the Japanese sword.

Online publication date: Sat, 07-Mar-2015

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Materials and Product Technology (IJMPT):
Login with your Inderscience username and password:

Username:        Password:          Forgotten your password?

Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com