The effect of sponge liner on the performance of simple solar still
by T.V. Arjunan, H.S. Aybar, N. Nedunchezhian
International Journal of Renewable Energy Technology (IJRET), Vol. 2, No. 2, 2011

Abstract: In conventional solar stills, a part of the radiation is reflected by the inner wall surfaces to the still components and the remaining energy is stored by itself. The main objectives of this experimental study are: 1) to utilise the energy available on the inner wall surfaces of a still by using sponge liner; 2) to find the optimum thickness of sponge liner. Two single-slope solar stills are fabricated with an effective area of 0.5 m². The experiments were performed for various thicknesses of sponge liners. It is concluded that: 1) operating temperature of the sponge liner still components is lower than the conventional still components; 2) solar still with 5 mm thick sponge liner gives more yield than the other sponge liner; 3) the sponge liner still reduces the conduction heat losses from inner wall surface to outer wall surfaces through back wall and side wall by 50%.

Online publication date: Sat, 21-Feb-2015

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Renewable Energy Technology (IJRET):
Login with your Inderscience username and password:

    Username:        Password:         

Forgotten your password?


Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com