Application of semi-direct injection for spark-ignition engine Online publication date: Fri, 12-Nov-2010
by Yuh-Yih Wu, Bo-Chiuan Chen, Anh-Trung Tran
International Journal of Vehicle Design (IJVD), Vol. 54, No. 4, 2010
Abstract: This paper proposes an application of a motorcycle engine lean-burn system for improving engine efficiency and reducing exhaust emissions. This Semi-Direct Injection (SDI) system consists of a high swirl charge, injection during intake-valve opening, and air-assisted fuel injection. The fuel enters the cylinder directly through the intake valve near the middle intake stroke for a richer mixture around the spark plug. A 125 cc, 4-valve, Port-Fuel-Injection (PFI) engine was retrofitted by designing a control plate to enhance the swirl. The swirl ratio was increased to 3.8 and the lean limit was extended to 1.7 of lambda (excess air ratio). The engine was tested at the low-load region, which includes most operation points of the ECE-40 driving cycle. A complete engine performance map was conducted for comparison between SDI and original PFI engines. The results show that Brake-Specific Fuel Consumption (BSFC) decreased by 11.3%. Brake-specific exhaust emissions of NOx and CO decreased by 32.0% and 92.9%, respectively. The HC emission increased by 47.7%.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Vehicle Design (IJVD):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com