An investigation into the design and manufacture of FRP composite W-beam guardrail
by Piyush K. Dutta
International Journal of Materials and Product Technology (IJMPT), Vol. 19, No. 1/2, 2003

Abstract: This paper discusses the design and manufacture of highway guardrail of W-shape with fiber-reinforced polymer (FRP) composite material and its testing. As a first approximation, laminate theory was used for the layup decision of the initial batch, and then the design was refined through a series of trial runs before the target 482 MPa (70,000 psi) tensile strength was achieved. The manufacturing process was done by the vacuum assisted resin transfer molding process. The test results showed that while the FRP W-beam tensile strength was of the same order of magnitude as that of steel, the flexural stiffness was approximately one-third that of the standard AASHTO steel Wbeam guardrail. Also, under flexure, even a fractured FRP W-beam bounces back to a linear shape after the load is removed, which suggests that, perhaps, in highway installations, post-damage replacement could be delayed longer than for the steel W-beams. The study showed that it is feasible to manufacture W-beam profile guardrails of different thickness to obtain the desired strength, stiffness, and impact characteristics.

Online publication date: Fri, 10-Oct-2003

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Materials and Product Technology (IJMPT):
Login with your Inderscience username and password:

Username:        Password:          Forgotten your password?

Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com