Poly (ε-caprolactone) as substrate for water denitrification Online publication date: Sat, 18-Jul-2009
by Haihong Zhou, Xuan Zhao, Jianlong Wang
International Journal of Environment and Pollution (IJEP), Vol. 38, No. 3, 2009
Abstract: In this paper, poly (ε-caprolactone) (PCL) was used as carbon source and biofilm supporter in a fixed bed bioreactor to biologically remove nitrate from drinking water. The experimental results showed that denitrifying microorganisms could easily adapt to PCL as carbon source and attach to the surface of PCL granules. The fine biofilm could form on the surface of PCL granules within 15 days. Denitrification rate was influenced by temperature greatly and it decreased sharply at low temperature (below 20°C) and it was strongly linearly correlated with influent DO level. The denitrification rate at DO 8.5 mg/L was 47.4% of the value at DO 1.4 mg/L. Fixed-bed bioreactor packed with PCL granules could remove 50 mg/L influent nitrate completely, but the effluent DOC and suspended matter level were high. Accordingly, post-treatment unit are needed to ensure the good quality of effluent. Nitrite level did not accumulate in the whole experiment. Microbial growth was the main reason for reactor clog.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Environment and Pollution (IJEP):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com
Our Blog 
Follow us on Twitter 
Visit us on Facebook