Measurement of the dynamic centre of pressure of the disk/pad interface during a braking operation
by John D. Fieldhouse, Naveed Ashraf, Chris Talbot, Thierry Pasquet
International Journal of Vehicle Design (IJVD), Vol. 51, No. 1/2, 2009

Abstract: This paper demonstrates the influence of the trailing end of the piston, or inboard, pad on the propensity of a brake to generate audible squeal. The unique technique was employed to measure the dynamic CoP at the pad/disk interface during a normal braking operation. This novel technique uses an embedded pressure sensitive film within the pad. The paper also presents the co-planar analysis of the pad/caliper contact regions and its influence on the position of the disk/pad CoP. The analysis shows how the trailing end of the piston pad influences the position of the CoP and goes on to explain why the centre moves as the pad abutment vibrates against the abutment. The paper includes additional work with a 12-piston opposed caliper where the initial CoP may be varied both along the pad and radially. Results show a very definite movement of the CoP as the brake pressure is increased.

Online publication date: Wed, 15-Jul-2009

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Vehicle Design (IJVD):
Login with your Inderscience username and password:

Username:        Password:          Forgotten your password?

Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com