Roof-to-ground contact force during a vehicle rollover Online publication date: Sat, 11-Jul-2009
by Sreekanta Das, Sudip Bhattacharjee
International Journal of Vehicle Safety (IJVS), Vol. 4, No. 1, 2009
Abstract: Current US Federal Motor Vehicle Safety Standards require that the roof strength of a vehicle must be such that it is able to withstand a quasi-static force equivalent to 1.5 times the unloaded weight of the vehicle, with a maximum roof deformation of 5″ (127 mm). In the public forum, it is often argued that the ''1.5 times the unloaded weight'' rule may not the most effective one for ensuring the safety of vehicle occupants. Therefore, the National Highway Safety Administration has proposed to increase the roof strength requirement to 2.5 times the unloaded weight of the vehicle for the available roof crush. Currently, no mechanics-based model is available in the literature dealing with the roof-to-ground contact forces when a vehicle is involved in rollover. Therefore, the current study was undertaken to develop two mechanics-based simple models, which can be used for estimating the required roof strength from the calculations of roof-to-ground contact force.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Vehicle Safety (IJVS):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com
Our Blog 
Follow us on Twitter 
Visit us on Facebook