Positron Annihilation Lifetime Spectroscopy in the analysis of microstructural changes of Y-TZP ceramics Online publication date: Sat, 23-May-2009
by P. Parente, G. Ferro, A. Tucci, L. Esposito, G. Timellini
International Journal of Materials and Product Technology (IJMPT), Vol. 35, No. 3/4, 2009
Abstract: Positron Annihilation Lifetime Spectroscopy (PALS) technique was used for microstructural characterisation of Y-TZP ceramics. Spectroscopic measurements were carried out on ceramic surfaces subjected to tribological tests. Positron annihilation mean lifetime values, measured both on the unworn and worn surfaces, showed a different behaviour when different sliding velocities were used. For samples tested at 0.3 and 0.7 m/s, the decrease of values of positron mean lifetime measured on the worn surfaces, compared with the measurements of the unworn surfaces, was related to the increased positron trapping in the grain-boundary-related space-charge region, due to defect equilibrium changes with grain size reduction. For samples tested at 1.0 m/s, the higher mean lifetime values, found on the worn surfaces, was ascribed to the increase in zirconia monoclinic phase fraction present on the worn scars.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Materials and Product Technology (IJMPT):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com
Our Blog 
Follow us on Twitter 
Visit us on Facebook