Surface studies of carbon-based ZnO nanocomposite films
by J. Hsieh, A.T.T. Koh, Daniel H.C. Chua
International Journal of Nanotechnology (IJNT), Vol. 6, No. 7/8, 2009

Abstract: The change in the surface and microstructural properties of pure diamond-like carbon (DLC) matrix when small quantities of ZnO were incorporated during deposition process was investigated in this paper. A 248 nm KrF Pulsed Laser Deposition (PLD) technique was used to fabricate these nanocomposite films. AFM showed that the ZnO grain sizes on the films increased with the increase of ZnO in the films, however, the overall film surfaces were still very smooth with RMS roughness <10 nm. XRD detected peaks at 2θ values of 34.4° and 36.4° indicated the presence of (0002) and (0101) planes of ZnO respectively confirming ZnO regions or clusters were present. High resolution XPS confirmed that ZnO and carbon compounds were present, and with an increase in ZnO, the carbon matrix showed a significant decrease in the sp³ content. 514 nm Raman spectroscopy confirmed XPS findings where a single broad peak gradually separated into two separate peaks in the region between 1100 cm⁻¹ and 1700 cm⁻¹ as the amount of ZnO increased. This suggested a transition in the microstructural properties of the carbon network from diamond-like (high sp³ content) to graphite-like (high sp² content).

Online publication date: Mon, 18-May-2009

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Nanotechnology (IJNT):
Login with your Inderscience username and password:

Username:        Password:          Forgotten your password?

Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com