The effectiveness of coatings when turning hardened cold work tool steel AISI D2 (60 HRC)
by Ahmad Kamely Mohamad, Noordin Mohd Yusof, Ali Ourdjini, Vellore Chelvaraj Venkatesh
International Journal of Machining and Machinability of Materials (IJMMM), Vol. 4, No. 1, 2008

Abstract: Studies have shown that by using the right combination of insert tool geometry and cutting parameters, hard turning can produce a better surface finish compared to the grinding process. The development of new cutting tools and improvements in machine tool rigidity provides a very competitive alternative to grinding. Newly developed turning grades are intended to permit versatile use in roughing and finishing applications for a broader spectrum of workpiece materials. The technological improvements in coatings make hard turning more feasible and its use has widely expanded. Today, the industry has a strong interest in multicomponent coatings, combining wear-resistance with a low coefficient of friction. In this study, the effectiveness of multilayer TiN/AI₂O₃/TiCN CVD coating was compared to TiAIN PVD coating when hard turning AISI D2 cold work tool steel of 60 HRC based on the tool life, tool wear, surface finish and chip morphology. Results show that low content CBN coated with TiN/AI₂O₃/TiCN and TiAlN showed similar tool life and that all types of coatings investigated failed by abrasion and plastic deformation. Both coated and uncoated cutting tools were found to produce good surface finish.

Online publication date: Fri, 24-Oct-2008

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Machining and Machinability of Materials (IJMMM):
Login with your Inderscience username and password:

Username:        Password:          Forgotten your password?

Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com