Electroless Ni coatings for the improvement of wear resistance of bearings for lightweight rotary gear pumps Online publication date: Sat, 27-Sep-2008
by P. Veronesi, R. Sola, G. Poli
International Journal of Surface Science and Engineering (IJSURFSE), Vol. 2, No. 3/4, 2008
Abstract: The possibility of improving the performances of current aluminium alloys in the bearings region of lightweight external gear pumps has been investigated. Two different electroless Ni-based coatings, one containing high percentages of P (10-14%) and the other modified with the addition of 25 wt% PTFE micrometric spheres, deposited on 2011 Al alloy, were characterised by scratch test and ball-on-disc tests. Comparison with an antifriction Sn-containing Al-alloy was performed. The PTFE-containing coating presents the lowest wear rate and friction against steel. However, the presence of PTFE spheres and the hardness mismatch with the substrate tends to favour tensile cracking of the coating.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Surface Science and Engineering (IJSURFSE):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com