A study of the strengthening mechanisms in the novel precipitation-hardening KeyLos® 2001 steel Online publication date: Mon, 16-Jun-2008
by M. Faccoli, A. Ghidini, R. Roberti
International Journal of Microstructure and Materials Properties (IJMMP), Vol. 3, No. 2/3, 2008
Abstract: KeyLos® 2001 is a new precipitation-hardening steel especially developed for plastic moulds. In this study the precipitation stage of KeyLos® 2001 steel has been investigated and compared to the results obtained with 17-4 PH steel. Precipitation-hardening has been carried out at three different temperatures and the stages of hardening and overageing have been studied in order to clarify the hardening mechanisms. It has been found that hardening and softening mechanism during the precipitation-hardening treatment occur at higher temperatures and in correspondence with more prolonged treatment times than those typical for the best known 17-4 PH steel; hardness is then expected to remain stable also for very extended mould lives. Microstructural investigations by means of Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) have also been carried out and the microstructural parameters responsible for the hardening and overageing have been pointed out.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Microstructure and Materials Properties (IJMMP):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com
Our Blog 
Follow us on Twitter 
Visit us on Facebook