Mechanically-activated solid-state synthesis of nanoparticles of HfB₂, HfC and HfN from partially hydrated hafnium tetrachloride
by E. Barraud, S. Begin-Colin, G. Le Caer, O. Barres, F. Villieras
International Journal of Nanotechnology (IJNT), Vol. 5, No. 6/7/8, 2008

Abstract: Nanocrystalline hafnium diboride, carbide and nitride are synthesised by a two-step process, namely a short mechanical activation step (∼1–2 h) of powder mixtures based on partially hydrated hafnium tetrachloride, ph-HfCl₄, and on magnesium, followed by a brief annealing step (∼1 h) of the activated powders in flowing argon at 1100°C. HfCl₄ is a by-product of the carbochlorination process of extraction of zirconium from ores. Magnesium has a strong reducing capacity and is insoluble in metallic hafnium. The unsought reaction products may then be eliminated during the additional heat treatment or by further leaching. Mechanically activated powder mixtures of ph-HfCl₄ + B and of ph-HfCl₄ + B + Mg yield either facetted grains or monocrystalline rods of HfB₂ according to the composition of the initial mixtures and to the temperature and duration of the annealing treatment. The mean size of the facetted grains ranges between 100 nm and 300 nm. The growth direction of the rods is along the c-axis. Their mean diameters are around 100 nm and their mean lengths are in the range 500 nm–1 um. Hafnium carbide HfC is directly mechanosynthesised from ph-HfCl₄ + Mg + C powder mixtures. A subsequent heat treatment in flowing argon allows to better crystallise the grains of HfC (∼100 nm) and to decompose the intermediate products. Annealing of ground ph-HfCl₄ + Mg blends in flowing nitrogen for 1 h at 1100°C yields HfN nanoparticles whose size ranges between 10 nm and 30 nm. Characterisations of powders by X-ray diffraction, thermogravimetric analysis, scanning and transmission electron microscopy, Fourier Transform Infrared Spectroscopy were performed to follow the phase evolution and to clarify the reaction mechanisms.

Online publication date: Sat, 14-Jun-2008

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Nanotechnology (IJNT):
Login with your Inderscience username and password:

Username:        Password:          Forgotten your password?

Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com