Determination of thermal stress distribution in metallic layer during selective laser sintering using finite element method
by Patil Makarand Ramu, Vinod Yadava
International Journal of Manufacturing Technology and Management (IJMTM), Vol. 13, No. 2/3/4, 2008

Abstract: Selective Laser Sintering (SLS) is used to make strong and hard metallic functional components layer by layer directly from several kinds of metallic powders. The high laser power (about 1 kW) during SLS results in high-localised temperature rise (about 1000–1500°C). Thermal stresses are generated due to temperature gradient. The study of thermal stress distribution within the metallic layer is important from the quality of the product point of view. A transient Finite Element Method (FEM)-based 2D temperature and thermal stress model has been developed to calculate the temperature distribution and thermal stress distribution within a single metallic layer formed on the powder bed using SLS. This paper predominantly deals with the effects of laser power and time of scanning on thermal stress distribution within a single layer of Ni-based alloy (82.8 %Ni, 9.5 %Cr, 2%B, 3%Si, 2.3%Fe, 0.4%C) during SLS.

Online publication date: Tue, 22-Jan-2008

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Manufacturing Technology and Management (IJMTM):
Login with your Inderscience username and password:

    Username:        Password:         

Forgotten your password?


Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com