Effect of high temperature on bond strength of concrete reinforced with 180° hooked bars
by Mohammed Qasim Mustafa; Jamal Al-Esawi; Zaid Al-Azzawi
International Journal of Computer Aided Engineering and Technology (IJCAET), Vol. 17, No. 1, 2022

Abstract: As far as the authors know, this is a novel study. Pull-out prism specimens were used to test the residual bond strength with compressive strength (30 MPa). The variables are the diameter of hooked bar (10 mm and 12 mm), and the temperature levels (200°C, 400°C and 600°C) in addition to room temperature. Ratio of stress of steel to concrete at failure (f_s / f_c′) is considered as an indication to the residual bond strength. The results showed that the stress ratio (f_s / f_c′) for the concrete with Φ10 mm bars is greater than Φ12 mm bars, also the results showed that the decrease in bond strength after exposing to high temperature for concrete with Φ10 mm bars is more than it for concrete with Φ12 mm bars. Up to 200°C, the decrease in bond strength is small, but the decrease for higher temperatures is significant. When the temperature was elevated to 400°C, the decrease is 18% and 11% for concrete reinforced by bars of Φ10 mm and Φ12 mm, respectively, while decrease is 27% and 15% when the temperature is elevated to 600°C.

Online publication date: Thu, 28-Jul-2022

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Computer Aided Engineering and Technology (IJCAET):
Login with your Inderscience username and password:

Username:        Password:          Forgotten your password?

Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com