Novel ''composite'' materials using porous sintered stainless steel adherends mechanically ''bonded'' with synthetic elastomers Online publication date: Tue, 01-Jul-2003
by B.S. Becker, J.D. Bolton, A.E.P. Morris, M.E.R. Shanahan
International Journal of Materials and Product Technology (IJMPT), Vol. 15, No. 3/4/5, 2000
Abstract: Artificial hip joints currently have a life span of 10-15 years because wear of the polymeric acetabular cup causes loosening of the femoral stem. Recent research has shown that compliant layers can extend the life of the joint to possibly 25 years or more by helping to maintain fluid film lubrication. The problem of ''bonding'' the compliant layer to a metallic cup was approached by manufacturing porous sintered stainless steel substrates with (1) a range of total porosity from 10 to 35%, and (2) graded structures, using a combination of different powder particle sizes and compaction pressures. An elastomeric polymer was ''bonded'' onto porous metal substrates to create cylindrical test pieces which were subjected to torsional loading. Substantial mechanical interlocking of the polymer in the interstices of the metallic substrates created a ''composite'' structure, preventing catastrophic polymeric fracture after interfacial failure. Thus the strain, load at failure and apparent energy of adhesion were considerably higher for porous substrates than for dense materials.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Materials and Product Technology (IJMPT):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com