Research on construction method of the prediction model for semi-trailer on-board weighing system Online publication date: Mon, 06-Jun-2022
by Yu Zhang; Hongxun Fu; Qiang Zhao; Huanbo Qiao; Xianyue Gang
International Journal of Heavy Vehicle Systems (IJHVS), Vol. 29, No. 1, 2022
Abstract: Aiming at the problems of overloading and inconvenient weighing of semi-trailer, this paper designed a semi-trailer on-board weighing system based on the strain measurement of the frame, and built the weighing prediction model of the system. The three-dimensional model of the semi-trailer frame was established, and the strain sensitive area of the frame was determined by using the finite element analysis method, and the suitable position was selected as the strain sensitive point. According to the load distribution of the semi-trailer frame, the strain and load of the traction pin and suspension components are fitted respectively, and the weighing prediction model of the system is established. Finally, by comparing the test load with the predicted load, it is found that the error of the predicted load is less than 1%, and the accuracy of the model meets the engineering requirements.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Heavy Vehicle Systems (IJHVS):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com
Our Blog 
Follow us on Twitter 
Visit us on Facebook