Mass optimisation of 3D-printed specimens using multivariable regression analysis
by Cristian-Vasile Doicin; Mihaela-Elena Ulmeanu; Allan E.W. Rennie; Elena Lupeanu
International Journal of Rapid Manufacturing (IJRAPIDM), Vol. 10, No. 1, 2021

Abstract: Fused deposition modelling popularity is attributed to equipment affordability, materials availability and open-source software. Given the variety of optimisation combinations, process parameters can be elaborate. This paper provides methods for optimisation of mass calculation using multivariable regression analysis. Layer thickness, extrusion temperature and speed were considered independent variables for a two-level factorial experiment. DOE was used for 12 sets of programs and analysis (two stages) undertaken using Design-Expert® V11 Software. In stage-1, four models were found to be significant. Stage-2 involved redesigning the remaining eight models, iteratively increasing the number of replicates and blocks. Adequacy of models was analysed, demonstrating that: model is significant, F-value is large, p < 0.05; lack of fit is insignificant; adequate precision >4.00; residuals are well behaved; R² is as close as possible to 1.00 or for models with multiple replicates, the adjusted R² and predicted R² differential <0.2. All models were validated through measured, calculated responses.

Online publication date: Tue, 04-Jan-2022

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Rapid Manufacturing (IJRAPIDM):
Login with your Inderscience username and password:

Username:        Password:          Forgotten your password?

Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com