A CFD investigation of nozzle position effect and turbulent flow phenomena of a hyperloop model Online publication date: Tue, 02-Feb-2021
by Steven Goddard; Yufeng Yao
International Journal of Theoretical and Applied Multiscale Mechanics (IJTAMM), Vol. 3, No. 3, 2020
Abstract: This investigation analyses a conceptual hyperloop model in a low-pressure tube using CFD simulation technique. A precursor validation study, similar to a published work, is adopted, and used as a baseline model to develop a replication of hyperloop configuration. The study continues with 2D simulations of three rear nozzle positions to identify a low-drag configuration, steady 3D simulations to capture more complex mean flow features, and unsteady 3D simulation to analyse time-dependant flow characteristics. It was found that the lower the rear nozzle position, the better the drag reduction, with an optimal slope angle of 8° for no flow separation around the nozzle. Furthermore, the front nozzle before the compressor should include a divergent section with careful design of the tip geometry and angle of the nacelle. A region with high temperature occurring on the underbody of the pod highlights the importance of thermal design for heat dissipation.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Theoretical and Applied Multiscale Mechanics (IJTAMM):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com
Our Blog 
Follow us on Twitter 
Visit us on Facebook