Improving shape accuracy of aluminium alloy surface part in electromagnetically-assisted stamping Online publication date: Tue, 06-Oct-2020
by Wei Liu; Xifan Zou; Yu Lei
International Journal of Materials and Product Technology (IJMPT), Vol. 60, No. 2/3/4, 2020
Abstract: The electromagnetically-assisted stamping process with uniform pressure coil was numerically investigated to improve the shape accuracy for a surface part of aluminium alloy. Firstly, two coils were compared to inspect the symmetry of magnetic pressure. An improved coil was chosen to avoid the sidewall distortion of part. Secondly, the discharge voltage showed a crucial influence on the springback control. The springback was significantly reduced by increasing the discharge voltage up to an appropriate level. Thirdly, the effect of the distance between the punch and the die on the springback was inspected. Too large distance would lead to over bending of part. A reasonable distance should be chosen to reduce the springback and improve the shape accuracy of part. Finally, the electromagneticaly-assisted stamping process was experimentally performed, and the desired shape of surface part was obtained.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Materials and Product Technology (IJMPT):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com
Our Blog 
Follow us on Twitter 
Visit us on Facebook