Drivetrain modelling and parameter calculation for an electric bus with fixed or 2-speed gearbox
by Martin Novak; Jaroslav Novak; Josef Morkus; Lubomir Musalek; Oleg Sivkov
International Journal of Electric and Hybrid Vehicles (IJEHV), Vol. 12, No. 3, 2020

Abstract: This paper presents drivetrain calculations for an electric bus. Parameters of motor, gears and motor efficiency map are used. The goal is to select the suitable motor and gearbox. Driving cycle SORT2 and real life driving cycles measured on bus lines are used. Based on the bus manufacturer assignment, only permanent magnet synchronous machines are considered. The motor output power is considered in the range of 120-160 kW. The selection of axle gear ratios was limited to 6.19, 6.5 and 7.35, as those are readily available. The gearbox was either a fixed one, with gear ratio of 1.8, or a 2-speed gearbox with a gear ratio of 1 and 1.8. The calculations have shown, that a 2-speed gearbox can decrease the energy consumption. The improvement is in the range of 1-3% dependent on the motor option and driving cycle.

Online publication date: Mon, 05-Oct-2020

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Electric and Hybrid Vehicles (IJEHV):
Login with your Inderscience username and password:

Username:        Password:          Forgotten your password?

Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com