Investigation of detector tube impacting in the Ringhals-1 BWR Online publication date: Sun, 20-Aug-2006
by Carl Sunde, Imre Pazsit
International Journal of Nuclear Energy Science and Technology (IJNEST), Vol. 2, No. 3, 2006
Abstract: Neutron noise measurements were made in two consecutive fuel cycles in the Swedish BWR Ringhals-1 with the purpose of diagnostics of vibrations and impacting of detector strings. Two diagnostic tools were used, first a traditional spectral analysis and second a wavelet-based method. Both types of methods have been used in the past, but not simultaneously during one fuel cycle. In addition, a new method, wavelet-based coherence, was tested with success. Based on the results of the analysis, with emphasis on the traditional method, the detector tubes were divided into three groups with respect to the severity and likelihood of impacting. For the first series of measurements, these conclusions could be checked against visual inspection of the fuel assemblies during refuelling after the cycle, in order to find impacting damage. A good correlation between the prediction of the analysis and the inspection results was found.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Nuclear Energy Science and Technology (IJNEST):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com
Our Blog 
Follow us on Twitter 
Visit us on Facebook