Effect of different sintering conditions on microstructural characterisation of Co-Cr metal laser powder
by Gürel Pekkan; Eda Taşçı; Keriman Pekkan; Murat Ispalarlı
International Journal of Microstructure and Materials Properties (IJMMP), Vol. 15, No. 1, 2020

Abstract: Co-Cr alloys have been used for many years in dentistry. In recent years, the fabrication of prosthetic restorations from Co-Cr alloys by metal laser sintering method has become widespread. This method is a combination of powder metallurgy and three-dimensional printing technologies. The surface microstructure of the material and the different phases formed on the surface of the material after sintering and heat treatment are extremely important since these metal substructures are layered with dental porcelain in fixed prosthetic dentistry. In this study, characterisation of Co-Cr alloy samples produced by direct metal laser sintering (DMLS) method and sintering under various atmospheric conditions were performed with X-ray diffractometer (XRD), scanning electron microscope (SEM) and energy-dispersive X-ray diffractometer (EDX). It was observed that sintering with different methods under various atmospheric conditions affected the XRD phase intensities. The sintering in the argon gas atmosphere yielded a more significant phase separation that facilitates the identification of different phases in XRD patterns.

Online publication date: Thu, 23-Jan-2020

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Microstructure and Materials Properties (IJMMP):
Login with your Inderscience username and password:

Username:        Password:          Forgotten your password?

Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com