Asymmetric gated Ge-Si0.7Ge0.3 nHTFET and pHTFET for steep subthreshold characteristics Online publication date: Mon, 21-Oct-2019
by Suman Lata Tripathi; Sobhit Saxena
International Journal of Microstructure and Materials Properties (IJMMP), Vol. 14, No. 6, 2019
Abstract: The miniaturisation of transistors imposes thermal limits on MOSFET structures due to increase in leakage current and static power consumption per unit area of chip below 20 nm technology node. Tunnel FET has potential to reduce static power consumption to design below 20 nm technology within thermal limits thus increases the scope of future scaling trends. A new asymmetric Ge-Si0.7Ge0.3 hetero-junction tunnel FET (HTFET) is proposed with different oxide thickness from source and drain side. The asymmetric Ge-Si0.7Ge0.3 HTFET has steep subthreshold characteristic, low DIBL with high ION/IOFF current ratio for operating voltage less than 1V. The proposed design can be fabricated easily due to the similar lattice structure of Ge and Si. The ION/IOFF current ratio greater than 108 is achieved for gate length of 15 nm in nHTFET having Pt/HfO2 as gate contact and oxide material. The lowering of parasitic BJT effect in OFF state condition is also achieved in the same.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Microstructure and Materials Properties (IJMMP):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com
Our Blog 
Follow us on Twitter 
Visit us on Facebook