Modelling and statistical analysis of surface roughness by Taguchi and RSM techniques in hard turning of AISI 52100 steel with multilayer coated carbide insert
by A.V. Pradeep; D. Lingaraju; S. Ramakrishna
International Journal of Machining and Machinability of Materials (IJMMM), Vol. 21, No. 4, 2019

Abstract: The statistical data of surface roughness (Ra, Rz) associated with the machining parameters (cutting speed, tool nose radius, depth of cut and feed) during turning of AISI 52100 steel using multilayer coated carbide inserts was experimentally modelled in this study. Analysis of variance (ANOVA) was employed to ascertain the significance of the cutting parameters whereas response surface methodology (RSM) depending on Taguchi design of experiments was employed to optimise the factors influencing surface roughness. The models established for approximation of Ra and Rz were 91.02% and 92.42% reliable. The most influencing parameter for Ra was tool nose radius followed by feed with contribution of 33.83% and 32.50% respectively, while the contribution of tool nose radius and feed rate for Rz was 39.21% and 33.46%. The optimum combination obtained through multi-response optimisation for minimum roughness was 70 m/min cutting speed, 0.05mm/rev feed, 0.1mm depth of cut and nose radius of 1.2 mm.

Online publication date: Sun, 11-Aug-2019

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Machining and Machinability of Materials (IJMMM):
Login with your Inderscience username and password:

Username:        Password:          Forgotten your password?

Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com