A comparative study of tribological and mechanical properties of composite polymer coatings on bearing steel Online publication date: Wed, 05-Dec-2018
by Anand Singh Rathaur; Jitendra Kumar Katiyar; Vinay Kumar Patel; Shubrajit Bhaumik; Anuj Kumar Sharma
International Journal of Surface Science and Engineering (IJSURFSE), Vol. 12, No. 5/6, 2018
Abstract: In this study, epoxy and SU-8 resin along with its composites was coated over bearing steel. The graphite, talc and base oil were used to fabricate the composites using spin-coater. The tribological and surface characterisation tests were performed on both type of polymer and its composite using ball-on-disk setup, optical microscope, 3D optical profilometer, and goniometer, respectively. From the results, it can be seen that epoxy and its composites polymer showed lower coefficient of friction (~0.16), high wear resistance properties (> 102 times), improvement in mechanical properties (elastic modulus and hardness) (~3-4 times) and better hydrophobic nature as compared to SU-8 polymer (~34%) and its composites. Furthermore, a neural network model was developed to determine the influential parameters on specific wear rate and coefficient of friction.
Online publication date: Wed, 05-Dec-2018
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Surface Science and Engineering (IJSURFSE):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email firstname.lastname@example.org