The full text of this article

 

Investigations of performance parameters in NFMQL assisted turning of titanium alloy using TOPSIS and particle swarm optimisation method
by Munish Kumar Gupta; P.K. Sood; Gurraj Singh; Vishal S. Sharma
International Journal of Materials and Product Technology (IJMPT), Vol. 57, No. 4, 2018

 

Abstract: This paper deals with the multi-response optimisation of process parameters during NFMQL assisted turning of titanium (grade-2) alloy using TOPSIS and PSO method. The cutting speed, feed rate, approach angle and different nano-fluids were considered as the input parameters, whereas tool wear (VBmax), main cutting force (Fc) and surface roughness (Ra) were output parameters. The response surface methodology is used and the multi-response fitness function is established with TOPSIS approach. Thereafter, the model significance and the influence of the process parameters have been investigated based on the ANOVA tests. In the end, the prediction of optimum parameters for multi-response characteristics has been performed by using PSO method. The outcome reveals that, the lower value of cutting speed (204 mm/min), lower value feed rate (0.11 mm/rev), moderate value of approach angle (75°) and graphite based nano-fluids are the optimum machining parameters.

Online publication date: Wed, 22-Aug-2018

 

is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

 
Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

 
Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Materials and Product Technology (IJMPT):
Login with your Inderscience username and password:

 

    Username:        Password:         

Forgotten your password?


 
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

 
If you still need assistance, please email subs@inderscience.com