The full text of this article

 

Simulation of surface structuring considering the acceleration behaviour by means of spindle control
by Dennis Freiburg; Felix Finkeldey; Michael Hensel; Petra Wiederkehr; Dirk Biermann
International Journal of Mechatronics and Manufacturing Systems (IJMMS), Vol. 11, No. 1, 2018

 

Abstract: Due to the increasing demands on surface quality of machined surfaces, deviations of the feed velocity, which can occur in complex 5-axis milling processes and are caused by the insufficient acceleration and deceleration behaviour of the machining centre, have to be avoided. This is crucial in the case of surface structuring by means of high-feed milling. The high-feed rate can be used to generate quasi-deterministic surface structures on forming tools. Applying surface structures for forming processes, the friction can be tailored to improve the form filling of small cavities. However, in order to generate homogeneous surface structures, it is important to ensure a constant feed per tooth during the milling process. In this work, a novel approach for the predicting surface structures using a geometric physically-based simulation system is shown. Furthermore, an empirical model was developed which represents the acceleration and deceleration behaviour of the used machining centre for predicting the deviations of the feed rate. Therefore, it is possible to take the alternating feed rate into account when simulating the milling process. In addition, a control approach, for adapting the spindle speed online, is used to keep the tooth feed constant.

Online publication date: Wed, 11-Apr-2018

 

is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

 
Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

 
Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Mechatronics and Manufacturing Systems (IJMMS):
Login with your Inderscience username and password:

 

    Username:        Password:         

Forgotten your password?


 
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

 
If you still need assistance, please email subs@inderscience.com