Effects of parameters on burr heights and diametral error in dry drilling Online publication date: Wed, 07-Feb-2018
by Anuj Vats; Vishal S. Sharma; Irshad Ansari
International Journal of Additive and Subtractive Materials Manufacturing (IJASMM), Vol. 1, No. 3/4, 2017
Abstract: Burr formation similar to chip genesis is a common caution in conventional metal cutting operations in which material removal by direct tool-workpiece contact cause chip generation, variation in hole quality and post cutting finishing. In the present work, effects of various process parameters on burr type, entry, exit burr heights, roundness and diametral error obtained while drilling aluminium alloy 6082 has been investigated. Equations to predict the burr heights to be obtained for different values of machining parameters were also formulated such that a trade-off between MRR and deburring costs can be drawn for subsequent stages of machining.
Online publication date: Wed, 07-Feb-2018
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Additive and Subtractive Materials Manufacturing (IJASMM):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email firstname.lastname@example.org