The effects of temperature curves on the diamond/Ni-Cr interfacial properties in high-frequency induction brazing Online publication date: Tue, 09-Jan-2018
by Guoqin Huang; Meiqin Zhang; Hua Guo; Xipeng Xu
International Journal of Abrasive Technology (IJAT), Vol. 8, No. 2, 2017
Abstract: The present study alters the temperature characteristics during high-frequency induction brazing of diamond grits and investigates their effects on the properties of the diamond/brazing alloy interface. The high-frequency induction brazing was conducted in a vacuum using Ni-Cr as active filler alloy. An active temperature range was identified for the brazing of high-quality diamond tools. This temperature range, coupled with long heating time, favours the wetting of filler alloy to diamonds, and the chemical reactions and element diffusion at the diamond/alloy interface, but reduces the static compressive strength of the diamonds. If the temperature is slowly raised, the protrusion height and location of brazed diamonds can be more precisely controlled. Brazed diamonds with 30%-50% protrusion are optimal for cutting.
Online publication date: Tue, 09-Jan-2018
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Abrasive Technology (IJAT):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email firstname.lastname@example.org