Effects of grinding process parameters on the surface topography of PCBN cutting inserts Online publication date: Sun, 14-Jan-2018
by Bahman Azarhoushang; Thomas Stehle; Heike Kitzig-Frank; Hans-Christian Möhring
International Journal of Abrasive Technology (IJAT), Vol. 8, No. 2, 2017
Abstract: PCBN as a cutting tool material is a proper choice for machining difficult-to-cut materials. This is due to its hardness, chemical stability and toughness. The surface quality of PCBN tools, which are commonly ground with diamond wheels, strongly depends on the grinding parameters. The cutting forces, temperature, loading and wear of the grinding wheel influence the quality of the ground PCBN surface. The effects of cutting parameters on the cutting forces, roughness and loading of the grinding wheel during plunge face grinding of PCBN inserts are studied in this work. It was found that increasing the cutting speed from 20 to 40 m/s can decrease the cutting forces and surface roughness up to 20% and 30%, respectively. Additionally, the amount of oversize in roughing and the roughing parameters have a significant influence on the induced cutting forces in the finishing stage and the surface quality of the ground PCBN inserts.
Online publication date: Sun, 14-Jan-2018
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Abrasive Technology (IJAT):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email firstname.lastname@example.org