Kinematic and rock-breaking characteristics of new drill bit with swirling bottom-hole model Online publication date: Tue, 17-Mar-2015
by Jialin Tian; You Li; Lin Yang; Chuanhong Fu; Yonghao Zhu; Xiaolin Pang
International Journal of Materials and Product Technology (IJMPT), Vol. 50, No. 3/4, 2015
Abstract: For the low rock-breaking efficiency at borehole centre of the current drill bit, this paper presents a new bit with swirling bottom-hole model (swirling-cutting bit) and analyses its kinematics and rock-breaking features. Using the cylindrical coordinate, the bit revolution and cone rotation motion behaviour are analysed. With the position and velocities equations establishment of cutting element, the contact section between different cutting elements ring and rock are given, including the velocities distribution results on the section. With the numerical calculation and experimental test, the results show that the elements on maximum elements ring pass through the borehole centre, and broke the rock with compression and cutting effect. With the start point at the bottom-hole and end point at the borehole wall, the contact force of element acting on rock contains effect of 'digging' from the inside out and from the bottom up. The conclusions provide reference for improving the bit rock-breaking efficiency, cutting element distribution and bit structure optimisation.
Online publication date: Tue, 17-Mar-2015
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Materials and Product Technology (IJMPT):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email firstname.lastname@example.org