Comparative studies on GTA and PCGTA weldments of AISI 4140 and AISI 316 dissimilar metals Online publication date: Fri, 21-Feb-2014
by Madduru Phanindra Reddy; M. Mohan Prashanth; A. Aldrin Sam William; M. Arivarasu; K. Devendranath Ramkumar; N. Arivazhagan; S. Narayanan
International Journal of Microstructure and Materials Properties (IJMMP), Vol. 8, No. 6, 2013
Abstract: In this study, an attempt has been made to investigate the weldability, mechanical properties of dissimilar weldments of AISI 4140 and AISI 316. These dissimilar metals were welded using gas tungsten arc welding (GTAW) and Pulsed Current GTAW (PCGTAW) employing ER309L filler wire. It was observed from the tensile test results that the fracture was occurred at the parent metal of AISI 316 in all the trials for both the weldments. On examining the SEM fractographs, the mode of fracture was found to be ductile in nature. In addition, the scanning electron microscopy and electron dispersive X-ray spectroscopy (SEM/EDS) analysis was performed at various zones of the as-welded samples of AISI 4140 and AISI 316 to reveal the structure-property relationships.
Online publication date: Fri, 21-Feb-2014
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Microstructure and Materials Properties (IJMMP):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email firstname.lastname@example.org