The optimisation of bevel gear tooth in mesh with various types of profile modifications Online publication date: Thu, 01-Apr-2010
by Xia Chen, Qingming Chang, Jiao Wang, Changjun Chen
International Journal of Modelling, Identification and Control (IJMIC), Vol. 9, No. 1/2, 2010
Abstract: According to the relationship between the torsional mesh stiffness and the noise, the use of a rotated original tooth profile, circular curve and line curve as the form of the modified profile curve respectively is developed for bevel gear in order to depress the vibration and decrease the noise. The fluctuation of gear transmission error and combined torsional mesh stiffness is minimised, which is the criterion of gear tooth profile modifications. At the same time it must ensure that the variations of the load appear smooth transition. Of the three various kinds of tooth modifications, the best is the rotated modification, the next is the circular form and the worst is the linear modification in the view of transmission error and the load sharing ratio.
Online publication date: Thu, 01-Apr-2010
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Modelling, Identification and Control (IJMIC):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email firstname.lastname@example.org